Steel grabbing machine
Steel grabbing machine refers to the machine that grasps steel material, which is generally evolved from hydraulic excavator.
Steel grabbing machine Forearm and forearm Commonly known as "grab arm", it is generally longer, and its front end is a steel grabber, which is also called plum blossom hydraulic grab and orange petal grab. Its main function is to grab and load various materials such as waste metal, industrial waste, crushed stone, construction waste and domestic waste. The main types are original steel grabbing machine and assembled steel grabber.
The biggest difference between the steel grabbing machine and the ordinary excavator lies in the difference of the front-end working device, that is, the different working purposes
The forearm of the common excavator is generally short, and the front end is the bucket, which is mainly used for excavation and loading operations; its shape and structure are also different from that of the ordinary excavator.
The standard of the working device of the steel grabbing machine is the straight arm bent dipper stick. It can also be manufactured with the straight arm and the curved arm with the bending arm, which can be designed according to the requirements of the customers.
Original steel grabbing machine
The original steel grabbing machine refers to a complete steel grabbing machine when the new machine leaves the factory, that is to say, the machine manufacturer designs and produces according to the requirements and standards of the steel grabbing machine from the beginning to the factory, and the original steel grabbing machine is generally expensive.
Refitting steel grabbing machine
The modified steel grabbing machine, as the name implies, is a modified steel grabbing machine, which is generally transformed from an ordinary excavator used for excavation purposes, and is usually modified by a second-hand excavator, because no one will buy a new ordinary excavator to refit the steel grabbing machine. It is better to buy a new one than to buy the original one.
Therefore, it is more suitable to use the second-hand excavator to refit the grab steel machine, which can greatly reduce the investment cost.
Refitting ordinary excavator into steel grabbing machine
Because the front end of the excavator is not used for the same purpose as the ordinary excavator, it is necessary to replace all the working devices of the excavator.
First of all, it is necessary to replace the original standard short arm with the lengthening arm (that is, the grab arm), because the length and shape of the original standard arm are generally not suitable for long-distance material grabbing and material lifting and loading work. According to the actual situation, the original standard arm can not be replaced if it can meet the requirements of working conditions.
In addition, the original bucket is replaced by a steel grabber (gripper), that is, Meihua hydraulic grab. Otherwise, the grab and loading operation cannot be completed.
Luzhou Libang Metal Structure Co., Ltd. specializes in the production and processing of excavator bucket 、 Backhoe of excavator 、 Plum blossom grab of steel grabbing machine 、 And various metal structure products processing.
Luzhou Libang Metal Structure Co., Ltd
Mobile phone: 13550890427 Manager
Address: Section 2, Xinyang Road, high tech Zone, Luzhou City, Sichuan Province