The main function of wood grabbing machine is to use its external force to deform other related materials. Now it has been widely used in various fields.
although Wood grabbing machine The development time is relatively late, and the varieties developed are slightly less, but it has unique advantages and broad application prospects. Due to the different core links of the movement, the development of wood grabbing machine also shows diversified development.
Xiaobian will share with you different kinds of daily maintenance of "how to solve the problem of wood grabbing machine" which is more common in the market
The first step you need to focus on checking the power socket, plug, power cord for oxygen shedding or fracture, if not, plug in the power test machine.
When the motor of the wood grabbing machine does not rotate after power is turned on, but the wheel can be turned after the power is cut off. The basic core problem is that one of the two opening capacitors of the wood grabber fails to work. This generally happens. It is recommended that you replace the new one.
The second case is that if the wood grabber has been electrified but does not rotate, it can operate normally after applying external force. At the same time, there is a weak sound similar to current inside the machine, which is the reason for the slight leakage of starting capacitor.
Once the current noise is too large, the motor of the grab can not be started. Under such conditions, it can be concluded that it is caused by the start capacitor short circuit (the motor coil short circuit needs professional repair).
In the case of no professional instrument, the capacitor (4uf / 400V) can be removed first, and the two leads are respectively inserted into the zero and live line sockets of the commercial power supply to charge the capacitor, and then the two leads are taken down to short-circuit discharge.
At this time, if the discharge of the capacitor can be heard, it means that the discharge value of the capacitor can be decreased occasionally. The solution is to take out a new capacitor or put in a small capacitor. But if the capacitor has been damaged and short circuited, this solution can not be used. You must replace it with a new product of the same specification, so that the equipment can be repaired and operate normally. (please complete by professionals This kind of operation! ）
It is particularly important to maintain the wood grabber at ordinary times. We need to understand the key points of daily maintenance of the equipment:
1. Daily check whether the lubrication of the grabber bearing is good, and check whether all fasteners are tight. 2. Daily check whether the transmission belt of the instrument is installed correctly and in good condition. Once the belt is found to be slightly damaged in time, it should be replaced immediately. If there is oil stain on the belt or pulley of the machine, it is necessary to take a clean cloth to wipe it off immediately.
3. Daily check whether the protective device is in good condition. Once the unsafe phenomenon is found, it should be eliminated immediately. 4. Daily check whether there are materials or other impurities in the damaged cavity of the wood grabber, and if so, remove them.
5. Check whether the top or jack screw of the wood grabber is returned, and whether the adjusting gasket is installed correctly and pressed tightly.